Types of Check Valves (Non Return Valve) NRV

Types of Check Valves (Non Return Valve):- There are many kinds of check valves having variable body configurations. The subsequent are some normally used kinds of check valves.

1. Swing Check Valve

In swing check valves, the disc is unguided once it moves to completely open position or to completely closed position. Many alternative disc and seat designs are accessible to satisfy needs of variable applications. Soft-seated– swing check valves give improved leak tightness compared to metal-to metal seating surfaces. Combination seats consisting of a metal seat ring with resilient insert additionally provide higher leak tight characteristics. The seating angle, the angle between the seat and therefore the vertical plane, might vary from zero to forty five degrees. Vertical seats have a zero angle. Larger seat angles cut back the disc travel, leading to fast closing, therefore minimizing the chance of loud noise. Sometimes the seat angles are within the range of five to seven degrees.

Swing Check Valve
Types of Check Valves 1. Swing Check Valve

2. Lift Check Valve

Lift check valves are significantly custom-made for high-pressure service wherever speed of flow is high. In lift check valves, the piston disc is accurately target-hunting by long contact and an in depth sliding work with the peerless targeted dash pot. The walls of the piston and dash pot are of roughly equal thickness. Giant steam jackets are placed outside of the dash pot and within the piston to eliminate sticking out due to differential enlargement. The seat ring is of a barrel sort design of significant uniform crosswise. It’s commonly screwed in and seal welded. The flow gap is full port size.

The seat design of a lift-check valve is comparable to a globe valve. The disc is typically within the type of a piston or a ball. The ball-lift check valves are employed in extremely viscous fluid service. These check valves have superior leak-tight feature to those of swing check valves.

The piston kind lift check valves have an inclination to stick within the open position once service fluid has sediment treed on top of the piston. Giant lift check valves are equipped an equalizer line between the chamber on top of the disc and therefore the downstream aspect of the valve.

Lift Check Valve
Types of Check Valves 2. Lift Check Valve

3. Tilting Disc Check Valve

The tilting-disc check valve is intended to overcome a number of the weaknesses inherent in typical swing check valves. A mix of design options allows the valve to open absolutely and stay steady at lower flow velocities and to shut quickly upon stop of forward flow. The dome-shaped disc floats within the flow with fluid on each bottom and high of its surfaces, therefore its minimum dash pot impact. It performs well in pulsing, turbulent, and high-speed flows. These attributes prolong the valve’s lift and cut back flow-induced dynamic masses on the piping system.

Tilting Disc Check Valve
Types of Check Valves 3. Tilting Disc Check Valve

4. Folding Disc Check Valves

This valve is additionally named as double-disc or split disc check valve. It’s factory-made in wafer-body pattern and is out there with soft or exhausting seats. It’s extremely popular in low-pressure liquid and gas field services. Its light-weight compact construction makes it a preferred check valve once area and convenience are necessary.

Folding Disc Check Valves
Types of Check Valves 4. Folding Disc Check Valves

5. Vertical or In-Line Check Valve

These valves are offered in 2 configurations: in-line ball check and totally guided disc with soft or hard seats. In-line ball check valves will be utilized in each vertical and horizontal line. The totally guided disc inline check valves should be supplied with a spring-assist closure once employed in horizontal lines. In vertical lines, the guided disc in-line check valves might or might not be supplied with spring-assist closure. The spring-assist closure not solely assists in closing the valve quickly; it minimizes the chance of loud noise by preventing flow reversal.

They can be utilized in applications having pulsing flows, like in a discharge line of a reciprocating compressor. As a result of their compact in size, they’re ideal for application in tight areas.

Vertical or In-Line Check Valve
Types of Check Valves 5. Vertical or In-Line Check Valve
Vertical or In-Line Check Valve
Types of Check Valves 5. Vertical or In-Line Check Valve

6. Stop Check Valve

A stop check valve will either be used as a one-way check valve or as an isolation (stop) valve sort of a gate or globe valve. Throughout traditional operation of a system, these valves are
used as an everyday check valve; but, once required, these valves may be closed with the assistance of a screw-down stem that isn’t mounted to the valve disc. The stem, once totally screwed down, holds the free-floating disc against the valve seat, even as in a gate or a globe valve. These valves are accessible in tee-pattern, Wye-pattern, angle-pattern, and inclined pattern. The swing-and-piston lift-disc style check valves are normally used as stop check valves

Stop Check Valve
Types of Check Valves 6. Stop Check Valve
Stop Check Valve
Types of Check Valves 6. Stop Check Valve

Image Credit:- http://www.dezurik.com

You may also like...

2 Responses

  1. Herman says:

    Hi Dear
    It’s very interested.

  1. July 28, 2019

    […] pump has no back-flow prevention and so product can flow back through it once it’s stopped. A non-return valve (NRV) is thus typically placed when the outlet of the pump. A reservoir is employed to require the pumps […]

Leave a Reply

Your email address will not be published. Required fields are marked *

Translate »